D0VE heads that are working in vacuum classes!
2 posters
Page 1 of 1
D0VE heads that are working in vacuum classes!
Just wanted to share our confidence in Scotty's (the "Mad Porter") D0VE heads when competing in vacuum classes. We are using Scotty's valve train also and pulling 17" of vacuum. 4500lb F350 truck. Not gutted, it has lights, wipers, heater core, alternator everything. We have to race on tracks that requires 17" inches so in many of these races especially the drag races we are giving up 7" (or more because of their lesser rule requirements) of vacuum and the tracks down south we are even thrown in with aluminum heads.
These D0VE heads have pushed us to winning 18 out of 22 races this year in 4 states.Here is what it looked like! THANKS SCOTTY!!
http://www.metacafe.com/watch/5425426/the_bomb_2010_highlights/
.
.
.
.
.
.
.
.
.
These D0VE heads have pushed us to winning 18 out of 22 races this year in 4 states.Here is what it looked like! THANKS SCOTTY!!
http://www.metacafe.com/watch/5425426/the_bomb_2010_highlights/
.
.
.
.
.
.
.
.
.
Last edited by The BOMB on October 31st 2010, 6:51 pm; edited 1 time in total
The BOMB- Posts : 4
Join date : 2010-10-31
Re: D0VE heads that are working in vacuum classes!
There is a problem with the link. I am running a set of heads that were done according to Scotty's instructions and yes they do work very well in vac limited classes. What is the rest of the combo?
schmitty- Posts : 4538
Join date : 2008-12-02
Age : 54
Location : Holdrege, NE
Re: D0VE heads that are working in vacuum classes!
Sorry about that the link works again now. They allowed it to be posted and it was functional then ten minutes later they removed it saying it was 15 seconds too long.
We run a Scat 9000 rotating assembly, probe pistons, comp roller, 13.5 to 1, stealth, Biggs Dominator.
What do yo guys run?
Jeffro
We run a Scat 9000 rotating assembly, probe pistons, comp roller, 13.5 to 1, stealth, Biggs Dominator.
What do yo guys run?
Jeffro
The BOMB- Posts : 4
Join date : 2010-10-31
Re: D0VE heads that are working in vacuum classes!
Here is a link to mine.
https://www.429-460.com/proven-builds-f4/vac-motor-build-t179.htm
https://www.429-460.com/proven-builds-f4/vac-motor-build-t179.htm
schmitty- Posts : 4538
Join date : 2008-12-02
Age : 54
Location : Holdrege, NE
Re: D0VE heads that are working in vacuum classes!
That's a well thought out build! Have any video?
The BOMB- Posts : 4
Join date : 2010-10-31
Re: D0VE heads that are working in vacuum classes!
https://s246.photobucket.com/albums/gg87/schmitty1970/?action=view¤t=GEDC0004.mp4&newest=1
schmitty- Posts : 4538
Join date : 2008-12-02
Age : 54
Location : Holdrege, NE
Re: D0VE heads that are working in vacuum classes!
Good running truck!
The BOMB- Posts : 4
Join date : 2010-10-31
Re: D0VE heads that are working in vacuum classes!
Thanks, yours runs pretty hard too.
schmitty- Posts : 4538
Join date : 2008-12-02
Age : 54
Location : Holdrege, NE
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|