Changed Directions,,, again

Well I have done it again, changed directions on what I am doing.
I have a 1987 Mustang and was going to try a stock type suspension car. I was looking on Craigslist right before Thanksgiving and came across a back halfed Mustang. It was a 1986 just like my Idol, "Blake The`Snake Cartwright', well not just like, but you get the idea, and I had to have it.
Let me know if this was an OK deal?
It is an 86 coupe, 8 point cage, 3 x 2 rear frame rails, ladder bars and coil overs
narrowed 9 inch with disc brakes
5 lug front spindles
Weld drag-lights, skinnies up front and rear new M/T 13X31's
429 +030
C-9 heads
Speed Pro forged pistons
Canton oil Pan
Comp Roller cam and lifters
Comp stainless roller rockers
E'brock RPM air gap with an adapter and a Holley Dominator
MSD 6-AL and billit distributor
Hooker headers, cerramic coated
Trick Flow rocker covers
Aluminum Fuel cell
Holley Blue pump
TCI Street Fighter C-6 W/ loose concerter
New Autometer guages and tach

The car runs and drives, but it still needs the interior sheet metal and wheel tubs. It also needs side windows. I paid $2700.00 and drove it into Blakes trailer and we took it home.

What do you guys think.

wanna sell it? sounds like a killer deal!...as long as the back half looks like it was installed properly!

'65 T-BOLT wrote:wanna sell it? sounds like a killer deal!...as long as the back half looks like it was installed properly!

X2

sounds like a good foundation

Curt wrote:sounds like a good foundation

agreed...I would change the intake! tin it! and juice it!

Nice, sounds to me like you got a smokin deal.

He is way the hell farther down the road toward the track, and will have a good working car for when his good engine is done. The car needs a little sweetning but the basics are sound.

I'm glad to see him get the car, it will be nice soon.

So wheres the pics!! Sound like a damn good deal.
Bob

I will try to take some pics over the Christmas weekend.
I am going to get started on the sheet-metal ASAP.
As soon as Blake is done with his motor we will start on mine.
I have all the parts for a 466. It will have P-51 heads, Victor Intake, Ron's Flying Toilet, Flat top pistons, H-beam rods and a Blake Cartwright speced roller cam. This is one of his "I need more Cow-bell" grinds.