WTB - Solid Roller Lifters
2 posters
Page 1 of 1
WTB - Solid Roller Lifters
JR Performance Motorsport April 26th 2011, 5:42 am
I need a set of lifters for my primarry engine. I cracked the top of one at the last race when I lost a valve. So they are going in the back-up 466. But I now need a set of real good used ones for my 513 Blue Thunder headed unit.
I am in Bullhead City AZ 86442
You can reach me at 928-219-4929, please leave me a message and I will get back to you.
My e-mail is;
ePerformanceMarine@yahoo.com
Thank you
Jim
I am in Bullhead City AZ 86442
You can reach me at 928-219-4929, please leave me a message and I will get back to you.
My e-mail is;
ePerformanceMarine@yahoo.com
Thank you
Jim
JR Performance Motorsport- Posts : 200
Join date : 2010-12-01
Age : 55
Location : Bullhead City AZ -
Re: WTB - Solid Roller Lifters
blown86hallet April 28th 2011, 1:43 pm
I also have a set of Crane solid lifters, that came out of the same engine the 6.8 rods came from. Had Blue thunder heads also...
blown86hallet- Posts : 1012
Join date : 2009-08-07
Age : 112
Location : USA
Re: WTB - Solid Roller Lifters
JR Performance Motorsport April 30th 2011, 2:37 pm
blown86hallet wrote:I also have a set of Crane solid lifters, that came out of the same engine the 6.8 rods came from. Had Blue thunder heads also...
Adam, PM sent back to yah !
Thanks
Jim
JR Performance Motorsport- Posts : 200
Join date : 2010-12-01
Age : 55
Location : Bullhead City AZ -
Similar topics» BBF SOLID ROLLER CAMSHAFTS AND ONE SET USED COMP CAMS SOLID ROLLER LIFTERS
» Using Hydraulic roller lifters on the Comp XR292 R-10 Xtreme Energy Solid Roller cam?
» WTB---SBF SOLID ROLLER LIFTERS
» JT557 HERE NEED SOLID ROLLER LIFTERS FOR ROLLER CAM
» Solid roller lifters
» Using Hydraulic roller lifters on the Comp XR292 R-10 Xtreme Energy Solid Roller cam?
» WTB---SBF SOLID ROLLER LIFTERS
» JT557 HERE NEED SOLID ROLLER LIFTERS FOR ROLLER CAM
» Solid roller lifters
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|