*Wanted* Top end for 514
Page 1 of 1 • Share •
*Wanted* Top end for 514
soupbean on October 24th 2011, 11:38 pm
Looking to upgrade my topend on my 514. Prefer P51's or A460's. Interested in heads alone or a proven combo. Cash in hand!
soupbean- Posts: 161
Join date: 2011-10-24
Age: 33
Location: Gainesville, Ga. 
Re: *Wanted* Top end for 514
56Tbird on October 25th 2011, 9:41 am
Pm KyJelly ,he's thinking of taking off his P51's ???
56Tbird- BBF CONTRIBUTOR
- Posts: 3679
Join date: 2008-12-02
Age: 53
Location: Hawesville,Ky. -
Re: *Wanted* Top end for 514
Wheelie58 on October 30th 2011, 8:11 am
If you can wait until early 2012, I will probably sell the entire top end from my 514.
Blue Thunder "B" aluminum heads with BBC exhaust pattern with Victor intake, Crane rockers, Comp pushrods and Jomar stud girdles with an ARP head stud kit. All ported and proven setup. The last time it was dynoed, it made 838 HP at 6800 with a .650 roller.
This was with a 4-1/8" toilet on alky. Ran about 9.90 at 3650# in hot Georgia weather.
I have not determined a price yet. No flow numbers...it has been a long time...and I forgot. I will provide flow info when I remove the heads.
I will dyno that engine in about 3 weeks and will have current numbers. The engine has been stored for the last 4 years. Time to get it out!
March or April 2012 will be the planned time for this project.
I am putting the TFS A460s from my 605 on the 514.
Keith
Blue Thunder "B" aluminum heads with BBC exhaust pattern with Victor intake, Crane rockers, Comp pushrods and Jomar stud girdles with an ARP head stud kit. All ported and proven setup. The last time it was dynoed, it made 838 HP at 6800 with a .650 roller.
This was with a 4-1/8" toilet on alky. Ran about 9.90 at 3650# in hot Georgia weather.
I have not determined a price yet. No flow numbers...it has been a long time...and I forgot. I will provide flow info when I remove the heads.
I will dyno that engine in about 3 weeks and will have current numbers. The engine has been stored for the last 4 years. Time to get it out!
March or April 2012 will be the planned time for this project.
I am putting the TFS A460s from my 605 on the 514.
Keith
Wheelie58- Posts: 882
Join date: 2009-08-08
Location: Alpharetta, GA -
Re: *Wanted* Top end for 514
dfree383 on November 1st 2011, 10:58 pm
QtrWarrior, has a nice set of A429's for sale in the for sale section.
dfree383- BBF CONTRIBUTOR
- Posts: 6744
Join date: 2009-07-09
Location: Everywhere -
Re: *Wanted* Top end for 514
69F100 on November 2nd 2011, 7:54 pm
Ae has some for sale also here the link http://www.429-460.com/t11684-ford-motor-sports-a460-heads
69F100- BBF CONTRIBUTOR
- Posts: 2704
Join date: 2009-01-03
Age: 45
Location: Irwinville Ga. -
Re: *Wanted* Top end for 514
soupbean on November 2nd 2011, 8:21 pm
Wheelie58 - You have my attention! 
Thats about were I need to be. I will be running the car in pro at commerce next season and cant go faster than 6.00. But, I have to have the car ready for the season so March or April would be too long. If its due to time constraints, I'm in Gainesville and can come tear it down 
.
Thats about were I need to be. I will be running the car in pro at commerce next season and cant go faster than 6.00. But, I have to have the car ready for the season so March or April would be too long. If its due to time constraints, I'm in Gainesville and can come tear it down .
soupbean- Posts: 161
Join date: 2011-10-24
Age: 33
Location: Gainesville, Ga. -
Re: *Wanted* Top end for 514
bruno on November 3rd 2011, 4:38 am
i have a set of edelbrocks , which made 847hp n/a on my 562" ....pm me if interested
_________________
THXS TO ALL MY SPONSORS
www.bfevansraceparts.com
www.evansracingengines.com
JET BOAT BOB
DAN " THE STICKER MAN " HOBBS ...AKA >>>> 56TBIRD
bruno- Moderator
- Posts: 7779
Join date: 2008-12-02
Age: 39
Location: MILLBROOK , AL. -
Re: *Wanted* Top end for 514
dfree383 on November 3rd 2011, 4:43 am
soupbean wrote:dfree383 - Sold!
Look again, they are back up FS.
dfree383- BBF CONTRIBUTOR
- Posts: 6744
Join date: 2009-07-09
Location: Everywhere -
Re: *Wanted* Top end for 514
soupbean on November 3rd 2011, 8:49 pm
Bruno - I'm more interested in the entire package + the 2 guns for under 8k 
soupbean- Posts: 161
Join date: 2011-10-24
Age: 33
Location: Gainesville, Ga. -
Re: *Wanted* Top end for 514
QtrWarrior on November 3rd 2011, 9:49 pm
dfree383 wrote:soupbean wrote:dfree383 - Sold!
Look again, they are back up FS.
Yes they are ...For Sale !!!!
_________________
Mike Stevens
S/P, T/D 203F 2010 American SwingArm
Member of "The Band of Brothers"
Eliminator Products Dealer
Thanks to the vendors that help/support my Team,
Charlie Evans........Evans Racing Engine
Lem Evans............B.F. Evans RaceParts
Mark O'Neal .........Probe / Coast High Performance
Phillip Oakley... ....Oakley Motorsports
And most of all, Thanks to my Dad...RIP "Geez"
QtrWarrior- Moderator
- Posts: 761
Join date: 2008-12-02
Age: 53
Location: Savannah, Ga -
Re: *Wanted* Top end for 514
bruno on November 4th 2011, 8:28 am
soupbean wrote:Bruno - I'm more interested in the entire package + the 2 guns for under 8k
come on and get it ........ you could be running 5.20's this weekend
_________________
THXS TO ALL MY SPONSORS
www.bfevansraceparts.com
www.evansracingengines.com
JET BOAT BOB
DAN " THE STICKER MAN " HOBBS ...AKA >>>> 56TBIRD
bruno- Moderator
- Posts: 7779
Join date: 2008-12-02
Age: 39
Location: MILLBROOK , AL. -
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum