BES RACING A-460 cylinder heads for sale

What crank stroke and rod length?

Ace

Mahoney3105 wrote:https://www.429-460.com/t3187-rules-for-selling

Sorry about that didn't mean to break the rules

powerstrokeace wrote:What crank stroke and rod length?

Ace

it was a 4 inch stroke I wil have to call tony and ask about the rod length

-Mahoney

Mahoney3105 wrote:

Mahoney3105 wrote:https://www.429-460.com/t3187-rules-for-selling

Sorry about that didn't mean to break the rules

It's all

hey guys im personal friends with Wayde , i will tell you this his integrity is well spoken for

no special treatment.........

It would take a 4.140 stroke crank and a 4.625 bore to get 555ci so the 4.00 stroke sounds wrong

Ace

The 4.000" stroke sounds right to me, because an Eliminator block with the 4.700" bore and the 4.000" stroke gives you 554.9 CID. He had to use a BIG bore block to get the 2.500" diameter intake valves in.

Charlie

c.evans wrote:The 4.000" stroke sounds right to me, because an Eliminator block with the 4.700" bore and the 4.000" stroke gives you 554.9 CID. He had to use a BIG bore block to get the 2.500" diameter intake valves in.

Charlie

yup you got it premier block 4.700 bore with the 4 inch stroke 2.500 valves and they staggered the heads 200 thousands she likes to rev

Mahoney3105 wrote:

c.evans wrote:The 4.000" stroke sounds right to me, because an Eliminator block with the 4.700" bore and the 4.000" stroke gives you 554.9 CID. He had to use a BIG bore block to get the 2.500" diameter intake valves in.

Charlie

yup you got it premier block 4.700 bore with the 4 inch stroke 2.500 valves and they staggered the heads 200 thousands she likes to rev

Are the the heads off Ton's car?

Mahoney3105 wrote:

c.evans wrote:The 4.000" stroke sounds right to me, because an Eliminator block with the 4.700" bore and the 4.000" stroke gives you 554.9 CID. He had to use a BIG bore block to get the 2.500" diameter intake valves in.

Charlie

yup you got it premier block 4.700 bore with the 4 inch stroke 2.500 valves and they staggered the heads 200 thousands she likes to rev

Did you stagger the heads .200" or did you mean .020"? In other words did you have to elongate the head bolt bosses a bunch (.200"), or just stagger the heads a little within the existing round head bolt holes with off-set dowels?

Thanks,
Charlie

cut down C460 intake /reflange ?

from what Ive seen BES =

i got 2.5 valves in a 4.625 bore without problems.eliminator heads tho....

c.evans wrote:The 4.000" stroke sounds right to me, because an Eliminator block with the 4.700" bore and the 4.000" stroke gives you 554.9 CID. He had to use a BIG bore block to get the 2.500" diameter intake valves in.

Charlie

My idt heads have a 2.5 valve and im running them on a 4.625 bore with no issues of any kind so i dont see why this head would be any differant! Unshrouding the valve a little more maybe!

c.evans wrote:

Mahoney3105 wrote:

c.evans wrote:The 4.000" stroke sounds right to me, because an Eliminator block with the 4.700" bore and the 4.000" stroke gives you 554.9 CID. He had to use a BIG bore block to get the 2.500" diameter intake valves in.

Charlie

yup you got it premier block 4.700 bore with the 4 inch stroke 2.500 valves and they staggered the heads 200 thousands she likes to rev

Did you stagger the heads .200" or did you mean .020"? In other words did you have to elongate the head bolt bosses a bunch (.200"), or just stagger the heads a little within the existing round head bolt holes with off-set dowels?

Thanks,
Charlie

. Heads were staggered .200" and from my understanding Tony did this for better valve placement i'n the cylinder

ok ill delete it

you know it really doesn't matter if it is GOLD plated RULES are RULES they are here for a reason plain and simple untill you haver 25 Post you can't SELL it is to protect the members from Scammers coming on and selling parts then not delivering.... and there are some that come here to sell their JUNK and nothing else.... excuse me but that was not to offend you just the way it is.....

the Coug wrote:you know it really doesn't matter if it is GOLD plated RULES are RULES they are here for a reason plain and simple untill you haver 25 Post you can't SELL it is to protect the members from Scammers coming on and selling parts then not delivering.... and there are some that come here to sell their JUNK and nothing else.... excuse me but that was not to offend you just the way it is.....

thnxs coug for pointing that out ....... he is not a scammer

bruno wrote:

the Coug wrote:you know it really doesn't matter if it is GOLD plated RULES are RULES they are here for a reason plain and simple untill you haver 25 Post you can't SELL it is to protect the members from Scammers coming on and selling parts then not delivering.... and there are some that come here to sell their JUNK and nothing else.... excuse me but that was not to offend you just the way it is.....

thnxs coug for pointing that out ....... he is not a scammer

I will vouch for Wade as well.

bruno wrote:

the Coug wrote:you know it really doesn't matter if it is GOLD plated RULES are RULES they are here for a reason plain and simple untill you haver 25 Post you can't SELL it is to protect the members from Scammers coming on and selling parts then not delivering.... and there are some that come here to sell their JUNK and nothing else.... excuse me but that was not to offend you just the way it is.....

thnxs coug for pointing that out ....... he is not a scammer

Bruno WHY do you have these RULES then? it is not hard to get 25 post and participate in the board is it ?





just because you know him does that make him special? or is it favoritism?

Delete the post, i got a set of heads id like to list on here but im sure it wouldnt fly with my 11 posts!

the Coug wrote:

bruno wrote:

the Coug wrote:you know it really doesn't matter if it is GOLD plated RULES are RULES they are here for a reason plain and simple untill you haver 25 Post you can't SELL it is to protect the members from Scammers coming on and selling parts then not delivering.... and there are some that come here to sell their JUNK and nothing else.... excuse me but that was not to offend you just the way it is.....

thnxs coug for pointing that out ....... he is not a scammer

Bruno WHY do you have these RULES then? it is not hard to get 25 post and participate in the board is it ?





just because you know him does that make him special? or is it favoritism?

I understand your position Coug. Correct me if I am wrong but isn't the intent of the rule to make it more difficult for scammers?

I don't think vouching for someone is playing favourites. Wouldn't you rather buy from someone that others on here, that you may trust, have trust in the seller?

the Coug wrote:

bruno wrote:

the Coug wrote:you know it really doesn't matter if it is GOLD plated RULES are RULES they are here for a reason plain and simple untill you haver 25 Post you can't SELL it is to protect the members from Scammers coming on and selling parts then not delivering.... and there are some that come here to sell their JUNK and nothing else.... excuse me but that was not to offend you just the way it is.....

thnxs coug for pointing that out ....... he is not a scammer

Bruno WHY do you have these RULES then? it is not hard to get 25 post and participate in the board is it ?





just because you know him does that make him special? or is it favoritism?

the rules are so people dont get scamed , the participation is for the vendors dont just come on here and make money but that they participate ....if you cant understand that ...im sorry

its my decision wayde can post in the for sale section