632 C head engine

Sunoco Maximal

schmitty wrote:I can't do pics from my phone to the forum.  I will get the dyno sheets up tomorrow when I get home.  It did 1272 HP and 1018 tq on the Q

Dang nice numbers Rob! Good job to the Oakley motorsports crew!!! Good stuff seems to always come from the stables in Kentucky!

It only made 1,271.9 but it did go 1,018.8 for tq.  

Wow congrats on an awesome build. That would be 1300+ with a 2X4 no?

Congrats! those numbers will make them chevy boys cry!!!

There's a Chevy twin to it going home too, and its just a few ponies shy of the Ford. Nice Profiler deal that Oakley did also for a buddy of mine.

psfracer wrote:Wow congrats on an awesome build.  That would be 1300+ with a 2X4 no?

Paul, I don't have a clue where this deal would go with a T/R, but it should go a little more. Not going to speculate on how much better.

schmitty wrote:

psfracer wrote:Wow congrats on an awesome build.  That would be 1300+ with a 2X4 no?

Paul, I don't have a clue where this deal would go with a T/R, but it should go a little more.  Not going to speculate on how much better.

What about on Methanol?

68formalGT wrote:

schmitty wrote:

psfracer wrote:Wow congrats on an awesome build.  That would be 1300+ with a 2X4 no?

Paul, I don't have a clue where this deal would go with a T/R, but it should go a little more.  Not going to speculate on how much better.

What about on Methanol?

Unless you go to down nozzles and keep the methanol out of the ports, you will lose power.

How long till you have it ready and at a race? I can't wait to see it run.

68formalGT wrote:How long till you have it ready and at a race? I can't wait to see it run.

June 14. Come on out and watch it in person

schmitty wrote:

68formalGT wrote:How long till you have it ready and at a race? I can't wait to see it run.

June 14. Come on out and watch it in person

Shoot we're racing in Questa, NM that weekend.

That'ds a pretty sharp stick you got there. Don't put your eye out with it.  

schmitty wrote:

68formalGT wrote:How long till you have it ready and at a race? I can't wait to see it run.

June 14. Come on out and watch it in person

Are you going to and when is the Sturgis race?

Definitely going to Sturgis. August 3 and 5 are the race days.

I wanna borrow it for the piperack !!

rob,you told me you were having Oakley build you a motor not a stump puller  hope you got the intake I sent you for the well pump motor  

Thanks Larry. Yes the intake showed up the day before I left.

I finally made it home, and what a blast. I want to thank Phillip and Curly for an awesome engine, and a great time while there. When we took these engines out there in December, and discussed where we wanted to go, I never dreamed that we would have gone this far. Phillip has done some phenomenal work with both the BBC and BBF. My buddy Todd's engine was the first engine that Phillip ever built top to bottom brand new complete. That was three years ago when he was still in his garage. He now has a state of the art facility at his new shop and is growing leaps and bounds. My engine has been in the works since then when I bought a new block from Lem, and a set of rods from Phillip, and just waited for the rest of the pieces to fall into place. I am glad that I took my time and gathered the pieces over time. The most important piece of the puzzle came this last fall when Phillip made me a deal on his used Bryant 4.75" billet crank. I think he was just tired of my block taking up space in his shop, and wanted to build something out of it. I had purchased a set of Oliver rods from Phillip a while back that were waiting for this deal, but since then, the bar has been raised by Callies and Phillip traded me rods. With a solid bottom end planned out, it was time to decide what to do with my heads. Dave Freelander made the decision a little easier when he purchased my old castings and this let Phillip get creative with a new set of C's with his own porting and valve job. I now have an almost all brand new engine here. The only items reused from my old engine were the rockers and intake. There was one more part that we decided on while out there, and that was a new carb. I had seen a prototype 2.300" butterfly Quick Fuel carb that Phillip had a couple years ago, and had discussed with him at length. These carbs are very limited production and custom built. It is a serious game changer with these big engines. Fast forward to now. I could tell when we got to KY that Phillip and Curly were thrashing pretty hard to get our engines done, and done right. We weren't disappointed when we finally got to pulling them on the dyno. You can see the results, a big inch C head engine that made over 2 hp/ci. Thanks to Oakley Motorsports, Phillip and Curly for the most awesome single 4bbl C head engine existence. Phillip if you would please thank Mr. Bowles for the hospitality and great conversation while there too.

And thanks for a place to rest my feet a little Lem   

schmitty wrote:Sunoco Maximal

I wonder what it would have done with the Max NOS. I did back to back runs on my little deal with the Maximal, Q16, and Sonoco Max NOS and got the most with the Max NOS.

Awesome numbers and I wanna see videos of this thing skimming the surface!!

Nice! Can't wait for video of first run!

Great numbers how much is the compression ratio on this monster