429 - 460 Blocks, Heads and Rods.

--------------------------------------------------------------------------------

I am forced to move to a smaller storage unit and do not have the space to store these items anymore. I have 22 - DOVE-A Blocks, 68 pairs of C8VE, C9VE and DOVE Cylinder Heads, and many D6VE-AA Rods. All the Blocks have been baked clean and magnaflux checked, as have the Cylinder heads. Rods have been Jet Washed and checked. The following prices apply.

DOVE Blocks @ $350.00 each(plus shipping/crating)

DOVE Blocks w/Boss 429 bulkhead('A' on front under #5 Cylinder), $450.00ea + C/S

Pair of Cylinder heads @ $250.00(price INCLUDES FedEx shipping in 48 states). Your Choice of casting numbers.

Rods @ $7.00 each or $50.00 per set(plus shipping)

I have 2 - 429 DOVE 4 Bolt Blocks also.

1 @ 4.44" Honed and ready to go with ALL machine work done(deck, square, align hone, extra Oil Drainbacks Etc, etc). $1,000.00 plus shipping.

1 @ 4,36 that needs a sleeve due to RUST in 1 Cylinder. It may be fine at .060", but I'd make sure with a thinwall sleeve. It is NOT HOLED, just rough from the water. $850.00 plus shipping.

I ship via Forward Air to the closest Airport for you to P/U. Freight and insurance about $200, and $50.00 to crate and deliver to San Diego. That adds up to approximately $600.00 for a cleaned and magged 2 bolt, thick web Block. Figure shipping/crating the same on the 4 bolt blocks, so price accordingly.

I know that people on the Forum have tested various blocks and found them to be "all pretty much the same" whether they are DOVE, DIVE or D9TE HOWEVER, I STILL like the extra material that the DOVE Block offers as far as strength and rigidity goes. Makes me sleep better at 750 + hp.

Pm me thru the Forum, or email me @ dscmotorsport@myexcel.com. You can call at 951-763-9765. Parts located in Anza, CA.

I'M GIVING FORUM MEMBERS FIRST SHOT BEFORE EBAY, as I do on the FE Forum.

Thanks, Dennis

I do need to give you a call this week because i need another one of your single groove pullys for a 460.

OK. I'll be in most of the time next week. If I miss you, leave a contact # and I'll call you back before I leave for the day.

Dennis

Im looking for a saginaw steering pump bracket for a friend. Got one?

Hey, Dennis:
Where are you located, zip code so I can figure shipping cost for a D0VE-A block to zip 12833 (upstate New York)? Does anybody know the weight of a D0VE-A block with caps?

Wayne (SAWDOFF) Pearce