Good budget minded ring for a street driven 466?

View previous topic View next topic Go down

Good budget minded ring for a street driven 466?

Post  jbozzelle on October 15th 2017, 1:48 pm

Looking for suggestions on a good ring package for a street driven 466. May get bracket raced every now and then. Need 1/16, 1/16, 3/16 package...

jbozzelle

Posts : 3378
Join date : 2009-08-10
Age : 43
Location : New Orleans

View user profile

Back to top Go down

Re: Good budget minded ring for a street driven 466?

Post  nickpohlaandp on October 15th 2017, 3:01 pm

I've always used Total Seal rings and only ever had one issue... pretty sure it was a freak occurrence too. Under boost all of the ring gaps lined up right at the pin bore and it shot a little laser flame down the side of the piston. Lost a little power after that, lol. Other than that, I've always had good experience with them in any engine I've built.

Here's what that happened in... pucker factor of 10.




nickpohlaandp

Posts : 154
Join date : 2017-09-24
Age : 38
Location : Lake Charles, LA

View user profile

Back to top Go down

Re: Good budget minded ring for a street driven 466?

Post  rmcomprandy on October 15th 2017, 6:20 pm

jbozzelle wrote:Looking for suggestions on a good ring package for a street driven 466.  May get bracket raced every now and then.  Need 1/16, 1/16, 3/16 package...

Speed-Pro R-10593 30 is a good street ring set.

rmcomprandy

Posts : 4769
Join date : 2008-12-02
Location : Roseville, Michigan

View user profile http://www.rmcompetition.com

Back to top Go down

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum