Power valves..
2 posters
Page 1 of 1
Power valves..
What makes for better delivery of fuel, through the mains or through a power valve? Debating on pulling my pv on the primary side out, and square jetting. Also when adjusting a square jetted carb, do you need to keep all mains the same? Like, if 80's all around was a little fat, do you need to go to all 79's? Or could you try 80's rear 79's front? This will be a mud race deal. Idles only to warm up.
FORDMUD- Posts : 290
Join date : 2009-02-09
Location : Meridian MS
Re: Power valves..
found some really good reading!...It may help in your question......really good info and tech.
http://www.florida4x4.com/tech/quadrajet/qtune.pdf
http://www.florida4x4.com/tech/quadrajet/qtune.pdf
Smasher O'Brannan- Posts : 18
Join date : 2009-08-08
Age : 45
Location : from Kilkenny Ireland, now lake charles, la.
Similar topics
» Power valves.
» Blue thunder valves
» 1150 Dominator with power valves
» the dove c heads i bought , i measured the intake valves they were 2.250 assuming these are not stock valves ?
» 429 SCJ original ( used ) intake valves and NOS 2.19 PI valves - price lowered and shipping included!
» Blue thunder valves
» 1150 Dominator with power valves
» the dove c heads i bought , i measured the intake valves they were 2.250 assuming these are not stock valves ?
» 429 SCJ original ( used ) intake valves and NOS 2.19 PI valves - price lowered and shipping included!
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|