BIG BLOCK FORD
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Holley Hi-Ram for 385 series

4 posters

Go down

Holley Hi-Ram for 385 series Empty Holley Hi-Ram for 385 series

Post  nedceifus September 16th 2023, 11:21 am

Just gained access to the University of Nebraskas Innovation Campus. Lots of high tech prototyping & 3d printing equipment. I’m going to try & build a Holley Hi-Ram prototype for the 385 series Ford ¬†with a 3d printer. If it works out I may have one printed out of aluminum. Should be a fun project.
nedceifus
nedceifus

Posts : 97
Join date : 2019-07-31
Age : 47
Location : Nebraska

69F100 likes this post

Back to top Go down

Holley Hi-Ram for 385 series Empty Re: Holley Hi-Ram for 385 series

Post  nedceifus September 16th 2023, 11:30 am

Holley Hi-Ram for 385 series E09af410
Holley Hi-Ram for 385 series 0c873510
nedceifus
nedceifus

Posts : 97
Join date : 2019-07-31
Age : 47
Location : Nebraska

Back to top Go down

Holley Hi-Ram for 385 series Empty Re: Holley Hi-Ram for 385 series

Post  supervel45 September 16th 2023, 1:44 pm

That's Cool. Cool

If you could Swing It a Top For Dual Dominator Mounts for Carburetors or Throttle Bodies could be Worthwhile?

I "Assume" You are making it for CJ/SCJ Heads?

You Need To Start Printing Some Good BBF Racing Heads Also if it can be done so you can be Rich. Suspect

Or Just a Duplicate of The Mafia Intake. Wink

Anyways I Like It, Sounds Like a Good Idea and a Fun Project.

It May End Up Being 3D That Keeps BBF Alive and a Shorter Deck Racing Block Like the A500 Might Catch on in some Classes. Who Knows

supervel45

Posts : 4082
Join date : 2013-09-04

nedceifus likes this post

Back to top Go down

Holley Hi-Ram for 385 series Empty Re: Holley Hi-Ram for 385 series

Post  rmcomprandy September 16th 2023, 4:06 pm

nedceifus wrote:Holley Hi-Ram for 385 series E09af410
Holley Hi-Ram for 385 series 0c873510

You will need somewhat of a mirror image as the right bank is ahead of the left bank on a 385 Ford engine

rmcomprandy

Posts : 6008
Join date : 2008-12-02
Location : Roseville, Michigan

http://www.rmcompetition.com

nedceifus likes this post

Back to top Go down

Holley Hi-Ram for 385 series Empty Re: Holley Hi-Ram for 385 series

Post  nedceifus September 18th 2023, 10:21 pm

Been staring at this 460 of mine. Trying to dream up a way to make this work. Water running threw the manifold is a challenge. This will be fun, probably disappointing, but fun.Holley Hi-Ram for 385 series 753a1910
nedceifus
nedceifus

Posts : 97
Join date : 2019-07-31
Age : 47
Location : Nebraska

Mark Miller likes this post

Back to top Go down

Holley Hi-Ram for 385 series Empty Re: Holley Hi-Ram for 385 series

Post  supervel45 September 18th 2023, 10:32 pm

Might Start Here and Cut the Top off or Better Yet ask Keith.

Keep at it Though. Cool

https://www.429-460.com/t12818-tall-deck-bbf-sheet-metal-tunnel-ram

Better To Start with a Track Drag Race Only Version First in my Opinion and go From There.

External Plumbing Comes to Mind Also.

I Don't Know if You caught this Galaxie with the Speedy Dana 60 Axle and I hope you don't mind it in your Cool Intake Tread but The Tabacco Baron's 427 Supercharged Serious Rear Boost Assisted 19631/2-1964 Galaxie is The Baddest I have Ever Seen.

https://www.youtube.com/watch?v=FYnL_rp61Tg

Your Intake Should not be to Hard too Pull Off.

supervel45

Posts : 4082
Join date : 2013-09-04

nedceifus likes this post

Back to top Go down

Holley Hi-Ram for 385 series Empty Re: Holley Hi-Ram for 385 series

Post  Paul Kane September 19th 2023, 4:25 pm

supervel45 wrote:…You Need To Start Printing Some Good BBF Racing Heads Also if it can be done so you can be Rich. Suspect

Or Just a Duplicate of The Mafia Intake. Wink
Im pretty sure he means as a school project/personal project. Making and selling them would be patent infringement and land himself in a heap of legal trouble.

If you were just being facetious then please disregard this post.
Paul Kane
Paul Kane

Posts : 1026
Join date : 2009-09-15
Location : San Francisco Bay Area

http://www.highflowdynamics.com

Back to top Go down

Holley Hi-Ram for 385 series Empty Re: Holley Hi-Ram for 385 series

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum