Long Time Coming...Gonna' Dyno This Monday-2/8

Finally getting the new mill done...it's been a while since the yellow car made some smoke and noise. Looks like we'll be ready for a trip to KY this year!
Anyone care to take a guess at the numbers? I'll buy the winner a beer!
557-a-429 heads
4340 internals
around 15-1
Don't have the cam specs here but, .808-.802ish lift
1150 dommy on gas
Just a good 'ol bracket build.

Nice bullet. Hope she makes a bunch of HP.

those are some might nice holes you got there

Nice...........what kind of water pump is that.

882hp/788tk yum i like free beer

res0rli9 wrote:Nice...........what kind of water pump is that.

It is a Moroso Aluminum pump...I use the external belt-drive motor on it.
Nobody wants to guess the HP numbers?

I'd say Larry T is pretty close with his guess.

I'll give it a shot....855hp and 730tq

Thunderstruck wrote:I'll give it a shot....855hp and 730tq

That's real close to where I am guessing. I feel like a little kid trying to wait for Christmas Day!

I heard that. Have you ever had your engine on the dyno before ?

Has alot to do w/how GOOD the heads work w/build. 836 HP/722 TQ

Yes...I've ran this same set-up before only with a smallish cam (.740ish with less duration). I didn't want to post what it made...no hints...lol.
I screwed up and put a cast crank in it...260 passes later...kaboom. Broke it into 7 pieces, ruined a 4-bolt CJ block, bent all the rods, smacked the heads in a couple of spots...intake and valve covers were ok...lol.

814 on the hp

BTDT ! Put a single 300 shot on my 604 C-head 1x4 combo. Took it to Musi to dyno on spray. The Ford Motorsport crank had many years and runs on her. after 1 1486hp pull it looked like the bolt on the mandrel had come loose. That wasnt the case. I now have a 598 with a Bryant crank.

Looks good jeff, I think it will do just fine.

bruno wrote:those are some might nice holes you got there

A dude shouldn't be commenting on another dude's holes.....

Nice looking bullet!! Hope it runs strong and lasts a long time!!

Bill

heads been ported?

which dyno?

Thunderstruck wrote:I'll give it a shot....855hp and 730tq

That's what I was going to guess! I say 854hp

take it to AZ and that guy can get you 1000 hp on his happy dyno.......


Randy

750 HP

Is the free beer a silver bullitt perhaps? Maybe already in the shop? (see pic #2)

the1969fordguyinky wrote:750 HP

Is the free beer a silver bullitt perhaps? Maybe already in the shop? (see pic #2)

That's his 300 mouth power shot j/k 825 hp 750 trq. hope I'm not to high.

richter69 wrote:heads been ported?

which dyno?

Yes they have...I bought them used. The original owner had them flowed...said they were around 380ish on the intake.
The dyno is a DTS that is about 2 years old.

Lots of good guesses so far...keep 'em coming...I'm grinning from ear to ear.

867 hp 743 tq ..................... gotta be more then my bricks

861hp/754 tq.

Nevs wrote:865hp/774 tq.

this aint the price is right Steve