BIG BLOCK FORD
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Let the 466 mayhem begin...

+22
dirt_worker
1970 ford maverick
Mike R
schmitty
nuclearcobra
bruno
Mark Miller
TravisRice
56Tbird
bbf-falcon
501ranger
Tony M
audietorino72
72mav
blown86hallet
lghting94
res0rli9
69F100
Maddmattmustangs
billandlori
ThndrChkn
bb429power
26 posters

Page 4 of 7 Previous  1, 2, 3, 4, 5, 6, 7  Next

Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  bb429power December 28th 2010, 1:06 am

56Tbird wrote:I know your not oblivious to it...nothing's ever been posted that you haven't done before lol! king
tongue I can dish it out, I can take the hit...
bb429power
bb429power

Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  bb429power February 5th 2011, 7:32 pm

Got the cam in, trying to figure out how I can get the dial indicator square with the lifter. The head is getting in the way... Mad
bb429power
bb429power

Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  bb429power February 6th 2011, 6:25 pm

Figured it out, now I have the rockers soaking in oil as we speak... Twisted Evil
bb429power
bb429power

Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  bb429power February 13th 2011, 9:58 pm

Cam degreed. lifters in, rocker arms temporarily on, timing cover was a b***h and I may have to send it back Rolling Eyes once I got the dial indicator set up the cam was dead on the money, its scary affraid
bb429power
bb429power

Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  Maddmattmustangs February 15th 2011, 2:05 am

What was the cover issue?
Maddmattmustangs
Maddmattmustangs

Posts : 1201
Join date : 2010-02-15
Age : 34
Location : Berryville, Arkansas

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  bb429power February 15th 2011, 7:01 pm

Maddmattmustangs wrote:What was the cover issue?
The two holes on the bottom for the oil pan bolts didn't line up right. It kept cross threading.
bb429power
bb429power

Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  Maddmattmustangs February 16th 2011, 2:04 am

Wasn't a dorman re pop was it? There bad about that.
Maddmattmustangs
Maddmattmustangs

Posts : 1201
Join date : 2010-02-15
Age : 34
Location : Berryville, Arkansas

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  bb429power February 16th 2011, 5:39 pm

It was a Dorman...
bb429power
bb429power

Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  Maddmattmustangs February 16th 2011, 6:50 pm

Most of the covers I get that are repoped I usually chase the threads to make sure there good to go
Maddmattmustangs
Maddmattmustangs

Posts : 1201
Join date : 2010-02-15
Age : 34
Location : Berryville, Arkansas

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  bb429power February 16th 2011, 7:00 pm

Maddmattmustangs wrote:Most of the covers I get that are repoped I usually chase the threads to make sure there good to go
I don't know if it was repoped, but the threads were fine. Its just the location of the bolt holes.
bb429power
bb429power

Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  Maddmattmustangs February 16th 2011, 7:28 pm

I'd be taking that thing back then Wink
Maddmattmustangs
Maddmattmustangs

Posts : 1201
Join date : 2010-02-15
Age : 34
Location : Berryville, Arkansas

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  bb429power February 16th 2011, 7:38 pm

Maddmattmustangs wrote:I'd be taking that thing back then Wink
I painted it already, I hope they will take it back.
bb429power
bb429power

Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  Maddmattmustangs February 16th 2011, 8:36 pm

bb429power wrote:
Maddmattmustangs wrote:I'd be taking that thing back then Wink
I painted it already, I hope they will take it back.

Nail polish remover.
Maddmattmustangs
Maddmattmustangs

Posts : 1201
Join date : 2010-02-15
Age : 34
Location : Berryville, Arkansas

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  bb429power April 25th 2011, 8:22 pm

I think I'm going to get some more stuff done finally, I just want to get her running on the frame.
bb429power
bb429power

Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  Tony M April 28th 2011, 9:57 pm

Souds like your doing good. Need some pictures of the progress.
Tony M
Tony M

Posts : 479
Join date : 2010-01-17
Age : 54
Location : North Jersey

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  bb429power April 29th 2011, 3:07 pm

Tony M wrote:Souds like your doing good. Need some pictures of the progress.
Yeah I'll have to get some this weekend. I was able to borrow a long enough caliper to check the pushrod lengths so now I am able to get some work done. After that, I will put the intake on and order some parts. I need to (don't want to Laughing ) take all the inner springs out so I can break the motor in. Parts I need:
balancer
pushrods
flexplate
headers
I have the money to get all except I might not be able to get a flexplate, dad is supposed to check at a trans shop out by work to see what their price is.
bb429power
bb429power

Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  bruno April 29th 2011, 5:55 pm

ive got a balancer if you need one

_________________
coming soon x275 build .........
thanks to all my sponsors :

www.OakleyMotorsports.com
www.Induction-Solutions.com
www.bfevansraceparts.com
www.ultimateconverter.com
www.keithfulpmotorsports.com
bruno
bruno
Moderator
Moderator

Posts : 10877
Join date : 2008-12-02
Age : 51
Location : MILLBROOK , AL.

http://WWW.CKRME.COM

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  bb429power April 29th 2011, 10:28 pm

bruno wrote:ive got a balancer if you need one
This is the one I was going to get, its the same diameter as stock so I can keep my stock pointer. Let me know what you have and how much, PM me. Thanks for the offer. Very Happy
bb429power
bb429power

Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  bruno April 30th 2011, 8:13 am

bb429power wrote:
bruno wrote:ive got a balancer if you need one
This is the one I was going to get, its the same diameter as stock so I can keep my stock pointer. Let me know what you have and how much, PM me. Thanks for the offer. Very Happy

its a cat balancer , you can use the stock pointer , send my your addy and its yours

_________________
coming soon x275 build .........
thanks to all my sponsors :

www.OakleyMotorsports.com
www.Induction-Solutions.com
www.bfevansraceparts.com
www.ultimateconverter.com
www.keithfulpmotorsports.com
bruno
bruno
Moderator
Moderator

Posts : 10877
Join date : 2008-12-02
Age : 51
Location : MILLBROOK , AL.

http://WWW.CKRME.COM

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  nuclearcobra April 30th 2011, 10:28 am

Sell ya a brand new scat sfi flexplate new in the box never bolted on for 50 bucks i got it from Lem its internal balance or i'll give ya a stocker and also have a stock balancer as well you can have but i would jump on the cat from B if i was you.
nuclearcobra
nuclearcobra
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 1385
Join date : 2009-08-16
Location : Delaware Coast

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  bb429power April 30th 2011, 2:16 pm

nuclearcobra wrote:Sell ya a brand new scat sfi flexplate new in the box never bolted on for 50 bucks i got it from Lem its internal balance or i'll give ya a stocker and also have a stock balancer as well you can have but i would jump on the cat from B if i was you.

What bolt circle does the Scat one have? 11.5 right? For c6 trans? I need 164 teeth but I'm sure a different tooth count would work with the stock starter right???

Do you have a paypal account? If so PM it to me and send me a picture, thanks man. Very Happy
bb429power
bb429power

Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  bb429power April 30th 2011, 5:51 pm

Alright, figured out the pushrod length, got the intake on (I decided not to use the valley pan) the carb, spacer, and fuel lines were already bolted to the intake and has gas in it, and the air cleaner is on. Very Happy Pics will be here soon.
bb429power
bb429power

Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  nuclearcobra April 30th 2011, 6:47 pm

a diffrent tooth count would not work as the diameter is smaller but yes its for a c6 and 164 tooth. Lem sells them for about 60 plus shipping the reason i have a extra one is i'm doing a motor for my buddy that was supposed to be internal balance and i didnt check the # on the crank and the balance shop called and told me Evil or Very Mad it was my bad for not checkin the numbers so i had to get the external balance one plus the hachet weight and all was good. I don't have paypal but i'll ship it to you and you can send me a check for 50 bucks when ya get it i'll go snap a picture of it right now.


Last edited by nuclearcobra on April 30th 2011, 7:34 pm; edited 1 time in total
nuclearcobra
nuclearcobra
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 1385
Join date : 2009-08-16
Location : Delaware Coast

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  bb429power April 30th 2011, 7:11 pm

Alright, parents wont know its coming but when it shows up I'll say "well I gotta pay him the 50 bucks" Laughing I will PM you my address, Man you guys are helping me a great deal and I REALLY appreciate it!
bb429power
bb429power

Posts : 3129
Join date : 2010-02-13
Age : 30
Location : Michigan

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty flexplate pics

Post  nuclearcobra April 30th 2011, 7:28 pm

Let the 466 mayhem begin... - Page 4 Th_IMG_0143 Let the 466 mayhem begin... - Page 4 Th_IMG_0141 Let the 466 mayhem begin... - Page 4 Th_IMG_0142
nuclearcobra
nuclearcobra
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 1385
Join date : 2009-08-16
Location : Delaware Coast

Back to top Go down

Let the 466 mayhem begin... - Page 4 Empty Re: Let the 466 mayhem begin...

Post  Sponsored content


Sponsored content


Back to top Go down

Page 4 of 7 Previous  1, 2, 3, 4, 5, 6, 7  Next

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum