Planning stage,looking for advice!!
2 posters
Page 1 of 1
Planning stage,looking for advice!!
dirtbogger March 7th 2010, 10:04 pm
The stock class I've been running in required iron heads, they are now going to call it super stock and allow us to run aluminum heads. I need advice from you guy's that know on some combo's. My limitations are no dominator carbs, and still have to pull 18" vacuum at 1000 rpm's. As long as I make the vacuum, anything goes! Thank's for any input. Ralph
dirtbogger- Posts : 172
Join date : 2009-08-19
Age : 64
Location : hammond la.
Re: Planning stage,looking for advice!!
dfree383 March 7th 2010, 10:12 pm
Cubic inch rule? What other rules?
dfree383- BBF CONTRIBUTOR
- Posts : 14798
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Re: Planning stage,looking for advice!!
dirtbogger March 7th 2010, 10:26 pm
No. Carb and vacuum are only limits!dfree383 wrote:Cubic inch rule? What other rules?
dirtbogger- Posts : 172
Join date : 2009-08-19
Age : 64
Location : hammond la.
Similar topics» Looking for advice on new build. Planning on 500-550" with twin turbos
» ok truck guys i need advice come on in heros need motor advice also
» Planning the new project
» I started planning my next project.
» Anyone planning to go to the Detroit Autorama?
» ok truck guys i need advice come on in heros need motor advice also
» Planning the new project
» I started planning my next project.
» Anyone planning to go to the Detroit Autorama?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|