stroker motors and stock flywheel
3 posters
Page 1 of 1
stroker motors and stock flywheel
duff429 July 22nd 2010, 5:19 am
When does a stroker motor require a aftermarket steel flywheel? RPM? Would it be best for me to sell my stock cast 429 flywheel from my cyclone and get a steel one no matter how big I build a engine?
duff429- Posts : 202
Join date : 2009-08-20
Age : 39
Location : Wyoming/ North Dakota
Re: stroker motors and stock flywheel
dfree383 July 22nd 2010, 10:53 am
Its not a bad idea to get a Billet Steel Flywheel for any application beyond stock.
The stock stuff is fine for lower RPM / Daily Driver stuff. but when you start spinning them 40+ year old used stuff is not the best thing to have next to your feet.
The stock stuff is fine for lower RPM / Daily Driver stuff. but when you start spinning them 40+ year old used stuff is not the best thing to have next to your feet.
dfree383- BBF CONTRIBUTOR
- Posts : 14801
Join date : 2009-07-09
Location : Home Wif Da Wife.....
whitefield- Posts : 2243
Join date : 2009-08-23
Age : 56
duff429- Posts : 202
Join date : 2009-08-20
Age : 39
Location : Wyoming/ North Dakota
Similar topics» WTB stock flywheel
» stock flywheel hp limit
» Ons a stroker with 2.2-2.4 oil clearance and 3 on main will a stock volume pump with a HV spring work ok?
» Engine Swap Flywheel question/ 400M Flywheel on a 460?
» Waking up a stock 5.0 roller engine - valvespring options while keeping stock retainers/rotators, etc...?
» stock flywheel hp limit
» Ons a stroker with 2.2-2.4 oil clearance and 3 on main will a stock volume pump with a HV spring work ok?
» Engine Swap Flywheel question/ 400M Flywheel on a 460?
» Waking up a stock 5.0 roller engine - valvespring options while keeping stock retainers/rotators, etc...?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|