Need some input
Page 1 of 1 • Share •
Need some input
Northwest outlaw on June 19th 2010, 12:47 pm
Ok so im kicking some thing around need some intakes on this.
4.3 x 6.7 x 4.400
SCJ heads
M-9424-G429 intake
1050 or bigger carb
300 fogger on a Controller
pwoerglide Nitrous conv.....
in a 2600 lbs vechical
I know all the info not there just looking rough ETs 1/4.. I need to see if im going to go this way or turbos or diferent motor thanks Jason
4.3 x 6.7 x 4.400
SCJ heads
M-9424-G429 intake
1050 or bigger carb
300 fogger on a Controller
pwoerglide Nitrous conv.....
in a 2600 lbs vechical
I know all the info not there just looking rough ETs 1/4.. I need to see if im going to go this way or turbos or diferent motor thanks Jason
Northwest outlaw- Posts: 959
Join date: 2009-06-26
Age: 36
Location: Pinehurst Idaho 
Re: Need some input
Northwest outlaw on June 19th 2010, 1:04 pm
sorry going to fast for my own good 13.1cr out of box heads and intake so say a cam that in that ball park.
Northwest outlaw- Posts: 959
Join date: 2009-06-26
Age: 36
Location: Pinehurst Idaho -
Re: Need some input
bruno on June 19th 2010, 2:11 pm
LOW 8'S ........ maybe high 7's at sea level and good air
_________________
THXS TO ALL MY SPONSORS
www.bfevansraceparts.com
www.evansracingengines.com
JET BOAT BOB
DAN " THE STICKER MAN " HOBBS ...AKA >>>> 56TBIRD
bruno- Moderator
- Posts: 7790
Join date: 2008-12-02
Age: 39
Location: MILLBROOK , AL. -
Re: Need some input
dfree383 on June 19th 2010, 4:01 pm
Probably Mid-high 8's IMO. Any reason why not to go with a 4.5 x 4.6 and do a 598" motor? Spend the $$ on the block now.
dfree383- BBF CONTRIBUTOR
- Posts: 6749
Join date: 2009-07-09
Location: Everywhere -
Re: Need some input
Northwest outlaw on June 19th 2010, 10:02 pm
Im just kick some thing around seeing what way i want to go on this.
Northwest outlaw- Posts: 959
Join date: 2009-06-26
Age: 36
Location: Pinehurst Idaho -
Re: Need some input
jones on June 19th 2010, 11:41 pm
dfree383 wrote:Probably Mid-high 8's IMO. Any reason why not to go with a 4.5 x 4.6 and do a 598" motor? Spend the $$ on the block now.
Yup, I'm pissed at myself for putting the money that I have in a factory block. Oh, forged crank forsure!!
jones- Posts: 1413
Join date: 2008-12-02
Location: Philadelphia, MS. -
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum